Tips on Caring for the camera and lens to not moldy

To have the camera you can always be counted on to produce quality photos, not just the camera that need to be treated. The camera lens that you have also not forgotten.

Yes, the lens is the ‘eye’ of the camera who was instrumental in capturing the clarity, color, and image detail. Then how to take care of the camera and lens to last a long time and not moldy?

Here are simple steps that you can do.

Store in a Decent

Tropical country which means to have a fairly high humidity (above 70 percent). That figure will rise during the rainy season.

High humidity can damage electronic components as well as a camera sensor, so the fungus can grow and thrive in the optical lens. Even so, the level of humidity that is too low is not good because it can interfere with the mechanical system of the camera.

Precisely, the movement of mechanical components at risk the camera can not move smoothly (drag).

Ideally, the level of moisture in the lens and the camera is 40-50 percent Relative Humidity (RH). For more details, read the manual and your camera lens. Then, find the rules of ideal operating range, and check the recommended humidity ranges.

So, where should the camera and lens are stored? It helps you buy the cleaning cabinet so that it can control the level of humidity.

Dry cabinet is a special cabinet designed to hold electronic items. You can buy it at a camera store, with prices ranging from $100.

However, if you do not have sufficient funds, can use an airtight box and put a few bags of silica gel in it.

Keep away from Wet Conditions

Keep your camera and lens from the water due to wet conditions can cause moisture in the camera and make the components inside damaged. Unless the camera and lens you have the ability to waterproof or weather sealed.

You must always keep the lens clean. When cleaning the lens, it is recommended not to directly spraying cleaning fluid into the lens. Spray the first to the microfiber cloth, then wipe the lens gently.

If you are doing a photo shoot near the sea activity, wipe the camera with a microfiber cloth slightly moistened to remove residual salt stick in the camera.

Because the content of salt in the ocean is corrosive to the metal components in the camera and the lens, so the potential to produce rust.

Loose-Swap Lenses By Caution

One of the main advantages of digital SLR cameras compared to compact cameras is the lens that can be detached and replace. However there are some things that must be considered during the process of replacement of the lens, especially if you do it outdoors.

Dust or dirt can get into the camera and sticking to the sensor, thus making shots seemed to have stains.

When removing exchange-lens, camera strap hanging on the neck, then position the camera facing down. Then attach the front lens cap (front lens cap) to be replaced, while pressing the lock button lens. Then rotate the lens up the slack, but do not completely detached from the camera.

Further grab new lenses that will be installed, remove the rear lens cap (rear lens cap) and place it within easy reach, while holding the lens with one hand.

Remove the old lens using the other hand, attach a new lens quickly and then rotate it until it locks. Remember, after replacing the lens, turn on the camera sensor cleaning feature to reduce the risk of dust spots.

5 Tips Smart Buy Smartphone Used Good Quality

There are many reasons people choose to buy a used smartphone. One of them is to meet the needs of communication with the second mobile phone in a special environment, such as a job.

Another reason that also makes a person choose a used smartphone is famous branded mobile experience to feel at a more affordable price. However, regardless of the reason, buying a used smartphone still need consideration.

To that end, here are some considerations for purchasing a used smartphone with a quality that is not far short of expectations.

1. Buy from people you know charmingly

If you want to buy a used smartphone, try looking through the closest acquaintances first. In this way, the possibility of being lied certainly smaller than buy from others in buying and selling sites. Do not forget to negotiate the price.

2. Check the completeness of smartphones including warranties

Always remember to ensure completeness of smartphones purchased. In addition to phones, other equipment such as a USB cable, charger (make sure the original), headset, and other goods.

Another thing to note is the card and the remaining warranty period.

3. Research the market price

Price research is important in order not to feel the costliness when buying a used smartphone. Not only the new version, the price range for a used smartphone can also be obtained from various sites selling.

4. Check the signal and WiFi

Before buying, make sure the signal receiver component in the life of the smartphone. Avoid loss of signal conditions, while in the area that actually has a good condition. In addition to the signal, features WiFi and Bluetooth are also certainly able to walk well.

5. Check the performance of a wide range of smartphone features

Do not hesitate to tamper with the smartphone features that will be purchased. Keypad, battery, speaker, and microphone as well as other functions should be ensured to run smoothly. Try also to make or receive calls.

Deciding on the Best Way to Store Photos and Videos

There is a famous comedian who has a joke about how in the past individuals had photo albums that were from specific events or vacations. Nowadays, he says that individuals have computers that store all the photos and videos from certain events. So he says that he has a computer from when he was single, he has a computer for when his kids were born, and he has a computer for his wedding. Each of these computer stores photos and videos from that time period.

In addition to being funny, this idea really shows that people have a lot of information they want to store. This is true no matter if you are talking about an individual or if you are talking about a business. Individuals have important documents, photos, videos, music, movies, and much more that they store on to their computer and storage devices. Businesses have a lot of information that needs to be stored, including past business records, tax papers, inventory lists, and more. This underscores the importance of creative storage systems.

When it comes to finding the right kind of storage system for photos, videos, and any kind of paperwork, security is of utmost importance. First, you do not want to physically lose the storage system. For this reason, some individuals have decided to store USBs and other external storage devices that they have in a fireproof safe in their home. If their home experiences a fire or there is some other disaster, their information will be protected. Second, security is important when it comes to protecting your identity and not having your information stolen digitally. For this reason, if you are looking to store your information online, you want to be sure to work with a reputable company.

You also want to find something that is appropriate for the amount of storage you need. This is especially true if you are going to make a decent size investment in the storage system that you are using. If you are going to be storing photos, videos, and important personal documents, you may need to not need to spend a fortune on storage. However, when it comes to important business documents, you may be willing to spend a little bit more in order to to protect the interests of your business. As you are looking for appropriate storage, you want to consider your current and future needs.

The Importance of Properly Packaging What You Are Selling

Business owners understand that their brand is only as good as the product that they make. There is no amount of marketing and there is no number of gimmicks that can make up for a bad product. However, something that many business owners do not think about is the effect that the way they package their goods determines the impression a customer gets of their goods.

A product’s package should communicate what it’s purpose is. It should transmit what the brand of the company is and what that brand means for consumers. The fact that most businesses do not understand this can be seen in the statistic that 95 percent of new products fail. And here’s the thing, the market is flooded with new products every single day. People just do not have the time to sit and examine and weigh the pros and cons of every single item they might throw into their shopping cart. So they use shortcuts when making their decision. They look at the package and based on the quality of the package they determine whether or not the product inside the package is worth paying for.

Packaging is so powerful because it transmits to your customers how you and the product inside the package is different from your competition. Interestingly, social media sites are full of videos of individuals who are unpacking a product that they purchased. Certain products have been so well packaged that people are ecstatic about opening them.

Good packaging is not just essential for large companies. It is especially important for startup companies because packaging can have a direct impact on whether or not the product they are selling takes off. On the other side of the coin, poor packaging can damage even the most well-known business.

Proof of the importance of packaging can be seen when looking at how changes in the way that cigarettes have been packaged affect whether or not people smoke. In Australia the government required cigarette companies to put graphic images on the outside to deter smoking. As a result, Australia has experienced the biggest decline in smokers than it has seen in two decades.

In addition to what is displayed on the exterior of the packaging, the way that the package is put together is important. More and more companies understand the benefits of using chemical vapor deposition when designing packaging that is going to be both attractive, safe, and durable.

6 Tips on buying a secondhand laptop cheap and quality

Laptops can be practically almost replace the function of the computer in daily activities at this time. Indeed, computers are still pretty much used to work in an office or activity in the gaming house and cafe, but the laptops offer high mobility dangerously close to the specifications of the computer.

The higher the specification of a laptop, the more expensive price. Therefore, one of the most economical way to have a high specification laptop is to buy a used laptop. Well, so you can get used laptops cheap but still good quality, follow some of these tips.

1. Buy from a trusted friend

Before getting into the online trading forum, you can start from their own friends first. Perhaps among them there are indeed willing to sell the laptops at low prices and quality is still good. If your friend slick, chances are you get a laptop that is still okay bigger.

2. Use the COD system

The payment system in place, or better known by COD (Cash On Delivery) is the best way to trade second-hand goods. You have to meet directly with the seller to determine the characteristics of the seller (slick or not) while trying to direct the performance of the laptop.

3. Check the market price range

If you know the market price of a new laptop, you can make it as a base to negotiate with the seller. Then, you can also check the prices of many used laptops sold in an online trading forum thrift. In this way, you can get to square off what a fair price for a used laptop that you shoot.

4. Search for a laptop with a life under 1 year

The longer the lifetime, the cost is the price of the laptop. However, laptop-of-life for too long certain potentially been damaged in certain parts.

In addition, the lifetime under 1 year is usually still covered by the warranty. This makes the laptop is still quite secure in terms of quality.

5. Check if the specification laptop

While fiddling with a used laptop, make sure you check if the specifications mentioned in accordance with the seller. You can see this in the Settings section, or open a command run (press Start + R on the keyboard), type ‘dxdiag’ and press enter.

6. Check the condition of the hardware

The final step, make sure the hardware conditions are still in good condition or in accordance with the seller described. For example, to check all the hard drive, you can copy and paste a number of files in the folder or drive. If it is very slow, it is likely a problem hard drive.

Check also the whole key keyboard and mousepad is still functioning well, because if there is damage, it will be difficult to be replaced. Also make sure the display, WiFi, USB port, fan, webcam, etc., are still functioning properly.

Some Benefits and Reasons Why You Should Choose Die Casting Method

When creating parts, there are many methods that can be utilized for the process. However,not all of these processes are created equal. Aluminium alloy die casting is the preferable method when it comes to parts casting. Here are some benefits and reasons why you should choose this method over others.

1. Die casting is an excellent method when combined with high-speed production. Thousands of castings can be made before any kind of retooling is required. The shapes created are able to be far more complex than those created with other production methods.

2. Die cast parts, especially those made from aluminum alloys, are resistant to heat and are known to be far more durable.

3. The strength of casts made from alloys is far greater than that of those made from plastic injection molds. In addition, since castings are all one piece and not fastened together, the strength is in the actual alloy and not in the joining process.

4. The surface finish on the product can be manipulated to the liking of the customer, no matter whether if it is textured or a smooth finish. Holes or threads or both can be manufactured in to the cast itself with no problem.

While there are several other types of manufacturing processes, aluminum alloy die casting remains superior in virtually all aspects. Here is a brief summary of how casting matches up with other processes:

Versus Billet Machined Parts- Producing parts from billets creates a considerable amount of scrap and is really only useful for a small amount of parts. Casting remains far more economical.

Versus Stamping- Casting can result in more varied shapes than stamping could ever hope to achieve. Choices in thickness are also increased when casting is chosen.

Versus Forgings- Castings can be made in a wider variety of shapes over traditional forging methods. Also, the fortifications can be made thinner with castings.

An experienced casting company such as Autocast can manufacture virtually anything that you can imagine using either aluminum or zinc alloys. When choosing to go with the casting method, make sure that the company is aware of the exact specifications of your project in advance.

Latest generation Bluetooth Promises High Transfer Speed

The latest version of the most popular wireless networking, Bluetooth, ready to slide on 16 June. Certainty is expressed directly by the Executive Director, Bluetooth, Mark Powell, some time ago.

This update will be named Bluetooth 5, no frills point behind the figures for updates. The move was chosen to simplify and facilitate the marketing process name.

Bluetooth 5 confirmed attendees with a series of new capabilities that make it better, especially in terms of speed.

This latest version has a wider range and speed transfer superior Bluetooth 4.2 up to four times.

In addition, there is also the addition of a much larger capacity when transmitting. Thus, information from a device that is not connected is much faster making it easier for the user.

It is uncertain how the amount will be used in packet transmission for Bluetooth 5.0. However, it will be more than the ability of the current package, ie, 47 bytes are 31 of them are available for data.

Unfortunately, unconfirmed list of devices that will be compatible with this latest version of Bluetooth. However, generally the latest version of Bluetooth requires a new Bluetooth device as well, not just through software updates.

For that, most likely Bluetooth adoption of the new 5 will be present at next year on devices, such as laptops, tablets, mobile phones, including other wireless accessories.